“This Old House” magazine notes that since the front door is the first and last thing we touch when entering and leaving our homes, “it’s easy to understand why many of us still like our doors to be made of wood — nothing else matches the material’s warmth and satisfying heft.”

“People choose wood entry doors first and foremost for their beauty; it’s a fine piece of furniture on the front of your home,” said Brad Loveless of Simpson Door Company.

For homeowners who enjoy the beauty of wood entry doors, options are now available to stand up to the harshest climates — from the wind-driven rains of Nantucket Island to the desert Southwest. Following are three ways to have the wood door you want and to ensure it will look great for years, no matter what the climate throws at it.

Bring your dreams to life

With doors available in hundreds of wood species, and numerous designs and glass options, it can be hard to envision how a particular door will look like on your home. Short of hiring an architect to make a sketch, most people have had to rely on their imaginations.

Recently, easy-to-use, free online tools have become available to simplify the door selection process. For example, Simpson’s “Test Drive a Door” enables people to upload a photo of their home and view different door options on it. This allows a homeowner to be sure before they buy.

Go for performance

People are used to looking for high performance when shopping for new cars or computers, but might not realize the same approach can apply to doors. Manufacturers have developed high-performance wood doors with superior weather resistance that last in the most demanding exposures, including coastal homes with no porch or roof overhang to protect the door.

One high-performance option to consider is choosing wood species that perform best in moist conditions, as this varies among wood types. Species that have been shown in laboratory testing to have natural moisture resistance include Douglas Fir, Black Locust, Nootka Cypress and Sapele Mahogany, among others. 

Another performance option some manufacturers offer in their wood doors is water-resistant composite blocks within the bottom of the door, where water can infiltrate. Doors also are available with full exterior cladding to protect them from rain and sun, while retaining the beauty of wood inside the home.

A strong finish

With any door, whether made of wood, steel or fiberglass, it is crucial to finish it for long-lasting protection from the elements. Doors are sold either factory finished or unfinished. If unfinished, the door must be finished by the door dealer, a contractor or the homeowner.

Manufacturers provide step-by-step instructions for best results from finishing, and those steps typically must be followed to ensure warranty requirements. Chief among these are to finish all six sides — front, back and all edges. As no wood surface should be left unfinished, finish should also be applied to the cut-outs for the handle and lock set, as well as any other openings, such as for mail slots or pet doors.